Viscoplastic behavior of AA7075 aluminum alloy at high strain rate

Journal of Mechanical Science and Technology - The flow stress increases with the increase in strain rate. This phenomenon is the strain rate effect of plastic deformation. Hopkinson experiment...     

仙游抽水蓄能电站尾水系统充排水试验

为检查工程质量,查找输水系统可能存在的问题并消除隐患,保障电站安全运行,福建仙游抽水蓄能电站在投产发电前,要对输水发电系统进行充水试验与放空排水试验,在试验过程中监测输水系统的应力、应变与渗漏水情况。本文以尾水系统为例,介绍了试验所应具备的工程条件、工作程序及技术要求、试验成果分析和存在问题处理等。试验表明,仙游抽水蓄能电站尾水系统设计合理,施工质量优良,结构可靠,可供同类工程参考与借鉴。     

浅谈大型水电站继电保护信息管理系统设计及运用

某大型水电站继电保护信息管理系统结构与网络配置设计,成功解决了保护及安全自动装置与故障录波设施种类繁多、装置的通讯方式和通讯规约不尽相同、上送的数据量大等难题,不但可以将子站所有继电保护及安全自动装置、故障录波装置采集的信息上送主站,还可以通过Web服务在办公网络发布,并形成数据库和报表,实现数据统一管理,电厂信息化和智能化管理,非常适用于人员配置少、设备布置分散、自动化设备众多的大型水电站。     

再生骨料自密实清水混凝土配合比优化及表观性能试验研究

利用再生粗骨料制备再生骨料自密实清水混凝土,采用正交试验的方法对再生骨料自密实清水混凝土的配合比进行优化,探究了水胶比、砂率及胶凝材料含量对混凝土工作性能、力学性能以及表观性能的影响规律及显著性.通过对试验结果的极差分析,发现胶凝材料含量对混凝土坍落扩展度影响最大,其次是砂率,水胶比的影响最小;对于7d抗压强度的影响程度从大到小依次为水胶比、砂率、胶凝材料含量;混凝土表面灰度标准差受胶凝材料含量影响最大,其次是水胶比和砂率;对混凝土表面气孔率的影响程度从大到小依次为胶凝材料含量、砂率、水胶比.通过方差分析得到水胶比与砂率对再生骨料自密实清水混凝土的7d抗压强度具有显著性影响;胶凝材料含量对坍落扩展度、灰度标准差和气孔率有显著性影响.     

PVC-O管材双轴取向工艺PLC控制系统的设计

简述了PVC-O管材的生产方法.结合PVC-O管材一步加工法的生产特点,开发了PVC-O管材双轴取向工艺的PLC控制系统.阐述了该控制系统的设计方案及控制方法.     

The formation of fibrous structure of polyamide 6 induced by the three-step forming process and its prominent reinforcement in nitrile rubber

Nitrile rubber (NBR) blends with excellent performance have always been a hot research topic in petroleum field. Due to the excellent performance and compatibility of polyamide 6 (PA6), it provides an opportunity for the preparation of high-performance NBR/PA6 blends. In this article, NBR/PA6 blends were prepared by the three-step molding process. Experimentally, it was found that PA6 has a prominent reinforcement effect in NBR matrix. The variation of this mechanical property was investigated from different aspects of the crystal structure, crystallinities, phase morphology, and so on. It can be cleared that the formation of fibrous structure of PA6 phase is the main factor for reinforcement of the polymer blends. Meanwhile, the formation mechanism of the special phase structure induced by the three-step process is deeply expounded and its structural evolution schematic is established. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47472.     

测量二次电子空间分布特征矩阵法的有效性分析

为了准确测量不同材料在实际环境中的二次电子空间分布，设计了一种新型的二次电子发射空间分布测量结构，给出了实验测量原理，用求解特征矩阵的方法对实验结果进行处理，得到了所需的二次电子空间分布。通过模拟计算对该测量方法进行了校验，模拟结果与假设二次电子空间分布函数相吻合，表明该测量方法可靠、测量精度高，为后续样机研制奠定了理论基础。     

EPMDA: an efficient privacy-preserving multi-dimensional data aggregation scheme for edge computing-based IoT system

In order to perform multi-dimensional data aggregation operations efficiently in edge computing-based Internet of things (IoT) systems, a new efficient privacy-preserving multi-dimensional data aggregation (EPMDA) scheme is proposed in this paper. EPMDA scheme is characterized by employing the homomorphic Paillier encryption and SM9 signature algorithm. To improve the computation efficiency of the Paillier encryption operation, EPMDA scheme generates a pre-computed modular exponentiation table of each dimensional data,and the Paillier encryption operation can be implemented by using only several modular multiplications. For the multi-dimensional data, the scheme concatenates zeros between two adjacent dimensional data to avoid data overflow in the sum operation of ciphertexts. To enhance security, EPMDA scheme sets random number at the high address of the exponent. Moreover, the scheme utilizes SM9 signature scheme to guarantee device authentication and data integrity. The performance evaluation and comparison show that EPMDA scheme is more efficient than the existing multi-dimensional data aggregation schemes.     

锂辉石-氧化钙烧结法提锂的物相重构与动力学

对锂辉石-氧化钙烧结过程进行热力学分析，绘制了各反应Gibbs自由能与温度的关系图。结果表明，Al₂O₃会优先和Na₂O、Li₂O、K₂O反应，然后与CaO反应生成CaO·Al₂O₃，而且烧结温度需高于1060℃以保证LiAlSi₂O₆能够完成晶形转变。并探讨了锂辉石-氧化钙烧结法提锂的反应机理。考察了不同烧结条件对锂浸出率的影响并对熟料进行X射线衍射（XRD）分析表征。实验结果表明，在配料比为1∶1.25、烧结温度1150℃、烧结时间60min时，锂的浸出率达到92.14%，熟料中的主要物相为Ca₂SiO₄与LiAlO₂。利用XRD和扫描电镜-能谱联用仪（SEM-EDS）对熟料与浸出渣的物相、显微形貌及元素分布情况进行了分析表征。为了确定烧结反应的控制性步骤，在最优烧结条件的基础上对烧结过程进行动力学分析，结果表明，锂辉石-氧化钙烧结体系属于球形颗粒三维界面化学反应控制，烧结过程的动力学拟合方程为\mathrm{1}-{(\mathrm{1}-x)}^{\mathrm{1}/\mathrm{3}}=\mathrm{0.00677}t。